usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model G200N50W4 features: ? rohs compliant ? 200 watts ? dc - 2.2 ghz ? aln ceramic ? non-nichrome resistive element ? low vswr ? 100% tested flange mount termination description the G200N50W4 is high performance aluminum nitride (aln) flange mount termination intended as a cost competitive alternative to beryllium oxide (beo). the termination is well suited to all cellular frequency bands such as; amps, gsm, dcs, pcs, phs and umts. the high power handling makes the part ideal for terminating circulators and for use in power combiners. the termination is also rohs compliant! general specifications resistive element thick film substrate aln ceramic mounting flange nickel plated copper operating temperature -50 to +150 c (see de rating chart) tolerance is 0.010?, unless otherwise specified. designed to meet of exceed applicable portions of mil-e-5400. all dimensions in inches. electrical specifications resistance value: 50 ohms, 2% power: 200 watts frequency range: dc ? 2.2 ghz return loss > 20 db from dc to 2.2 ghz specification based on unit properly insta lled using suggested mounting instructions and a 50 ohm nominal impedance. specifications subject to change. outline drawing unless otherwise specified dimensions are in inches 1 of 2 200 watts, 50
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 ? model G200N50W4 typical performance: power de-rating: mounting footprint and procedure: *actual performance could be limited by the solder properties of the application 2 of 2 G200N50W4 G200N50W4
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? G200N50W4
|
